Skip to content
Shop Our Categories
Recommended Builders and Designers
F.A.Q. / Contact US
Nav Menu 4
Nav Menu 5
Nav Menu 6
Nav Menu 7
Nav Menu 8
8" VERSA-TUNE ** LIMITED RUN- PLEASE READ DESCRIPTION
Made to order
Ships in 5-7 business days
READ DESCRIPTION BELOW!!!
**THIS LISTING IS A LIMITED RUN. AT THIS TIME WE ARE DEALING WITH EXTREME MATERIAL SUPPLY ISSUES. THE PIPE WE NORMALLY USE IS NOT AVAILABLE AT THIS TIME. THESE PORTS ARE WHITE IN COLOR, AND THERE WILL LIKELY BE OFF COLOR STAINS ON THE OUTSIDE DUE TO THE MANNER OF STORAGE AT THE SUPPLIER THIS WAS PURCHASED FROM. THESE PORTS ARE A LARGER INTERNAL DIAMETER THAN OUR NORMAL PORT, DUE TO THIS THERE IS NO CROSS COMPATIBILITY WITH OUR STANDARD PRODUCT. ADDITIONALLY, WE WILL NOT REVERT BACK AND FORTH IN THE FUTURE IF SOMEONE REQUESTS ADDITIONAL PARTS TO FIT ONE OF THESE PORTS ONCE WE REVERT BACK TO OUR NORMAL MATERIAL. THESE PORTS ARE WHITE IN COLOR.
*****I WILL UPDATE PHOTO OVER THE WEEKEND, THESE PORTS LOOK MUCH BETTER THAN THE PREVIOUS RUN.
WE APOLOGIZE FOR ANY INCONVENIENCE CAUSED BY THE CHANGE OF MATERIAL. HOWEVER, PLEASE UNDERSTAND THAT THIS IS OUR ONLY OPTION OTHER THAN COMPLETELY SHUTTING DOWN UNTIL OUR NORMAL MATERIAL IS AVAILABLE AGAIN.
This is the 8 inch diameter "versa-tune" adjustable length port kit. Our "versa-tune" kit is the original adjustable length flared pvc port kit that changed everything. These are COMPLETE PORT KITS that can be assembled to any length between 8 inches and 22 inches, quickly and easily, for ultimate functionality.
We recommend assembly with a high quality packaging / shipping tape in order to retain adjustability, or pvc primer and cement can be used for a permanent assembly.
This listing is for one complete port kit.
port I.D.- 8.1875" -- 8 3/16"
flare O.D.- 12.375" -- 12 3/8"
mounting DIA- 11.25" -- 11 1/4"
material wall thickness - 0.2"
8" VERSA-TUNE PORT LENGTH GUIDE
8" = flares only
9" = flares + 1"
10" = flares + 2"
11" = flares + 1" + 2"
12" = flares + 4"
13" = flares + 4" + 1"
14" = flares + 4" + 2"
15" = flares + 7"
16" = flares + 7" + 1"
17" = flares + 7" + 2"
18" = flares + 7" + 2" + 1"
19" = flares + 7" + 4"
20" = flares + 7" + 4" + 1"
21" = flares + 7" + 4" + 2"
22" = flares + 7" + 4" + 2" + 1"
*all of our ports are individually handmade. please understand that due to this, we can not guarantee an exact match in length between different manufacturing runs of product. we can only guarantee exact match on ports ordered at the same time.
*all ports ship raw/bare with no paint. please don't ask about paint options, we do not offer paint.
*port material color can vary at times, this is cosmetic only.
PVC will generally have blemishes/imperfections/scratches on the outer surface of the pipe. We have absolutely no control over this. Please keep in mind that these materials are not originally intended for what we do with them, and in their intended application these blemishes/imperfections/scratches would never be visible. These surface blemishes are present before we ever take possession of the material.
*The inner surface and face of the flare (portions visible in a typical installation) will be free of the previously mentioned cosmetic issues, though smaller fine lines can be visible from the material being formed on our moulds.
*port I.D. is the size you will use for the port while calculating your enclosure.
*dimensional specifications are average. pvc can expand and contract with heat, there can also be differences in the material from the pipe manufacturer.
2-pack 6 inch "versa-tune" port kit
6” versatune adjustable length port kit
Share your knowledge of this product.
Be the first to write a review »